Tips For Mobile Home Releveling
Re-leveling is still one of the best ways of handling cracks on walls, windows or doors. In a mobile home, such cracks are usually caused by the imbalance of the I-beam used for support. The imbalance may be caused by the underground roots, which causes the soil to move around. Similarly, problems with a level mobile home may result from other environmental issues such as excessive flooding. Mobile home releveling can therefore be done in order to return the structure back to its normal position and make it more accommodating.
A balanced home provides comfort and is also protected from other related damages that may arise. Being a demanding task, re-leveling involves multiple procedures. The first step involves removing the skirting around the entire house. Once the skirts are removed, the homeowner has easy access to all the piers used for supporting the structure.
Re-leveling is usually started at the centre of the home. This is done to enable the homeowner to check the level of each pier. This is followed by placing a long level at the nearest pier to the center and checking the bubble at the middle of the level. If the bubble settles at the centre of the level, then the house is balanced. In case there are piers that are not level they are marked out for future use.
A plastic tube is often used to attach a bucket or container that has a capacity of five gallons. About 1.9m litres of water are then added to the container for leveling. The plastic tube is used to set a water mark that is used to check the level of the I-beam bottom. The structure is balanced if the I-beam bottom level and the water level in the plastic tube is the same.
The next step involves placing the mobile home jack at the center. This is crucial in helping it bear the weight and also support the house. The I-beam is then raised at the same height of the water level mark in order to check the level of the structure. This is done to ensure that the level bubble settles at the centre. Routine programs should also be imposed to ensure that all re-leveling programs are effectively managed.
Being a progressive duty, the homeowner should keep checking the problem area through jacking the house. This involves checking particular areas such as the doors and windows to determine whether the problems have been properly corrected. Similarly, wedges can be used to support the beam while removing the jack.
There are several management tips that are used for the re-leveling purposes. These include fixing all problems in order to avoid recurrence of past problems. Re-leveling is an effective measure of reducing extra costs used for management as well as restoring the house stability.
Mobile home releveling also protects the house from the underground moisture that can make it damp. The moisture can also cause rusting to the metallic parts of the house. The homeowner should therefore use a plastic sheet to cover the ground to avoiding vaporization.
A balanced home provides comfort and is also protected from other related damages that may arise. Being a demanding task, re-leveling involves multiple procedures. The first step involves removing the skirting around the entire house. Once the skirts are removed, the homeowner has easy access to all the piers used for supporting the structure.
Re-leveling is usually started at the centre of the home. This is done to enable the homeowner to check the level of each pier. This is followed by placing a long level at the nearest pier to the center and checking the bubble at the middle of the level. If the bubble settles at the centre of the level, then the house is balanced. In case there are piers that are not level they are marked out for future use.
A plastic tube is often used to attach a bucket or container that has a capacity of five gallons. About 1.9m litres of water are then added to the container for leveling. The plastic tube is used to set a water mark that is used to check the level of the I-beam bottom. The structure is balanced if the I-beam bottom level and the water level in the plastic tube is the same.
The next step involves placing the mobile home jack at the center. This is crucial in helping it bear the weight and also support the house. The I-beam is then raised at the same height of the water level mark in order to check the level of the structure. This is done to ensure that the level bubble settles at the centre. Routine programs should also be imposed to ensure that all re-leveling programs are effectively managed.
Being a progressive duty, the homeowner should keep checking the problem area through jacking the house. This involves checking particular areas such as the doors and windows to determine whether the problems have been properly corrected. Similarly, wedges can be used to support the beam while removing the jack.
There are several management tips that are used for the re-leveling purposes. These include fixing all problems in order to avoid recurrence of past problems. Re-leveling is an effective measure of reducing extra costs used for management as well as restoring the house stability.
Mobile home releveling also protects the house from the underground moisture that can make it damp. The moisture can also cause rusting to the metallic parts of the house. The homeowner should therefore use a plastic sheet to cover the ground to avoiding vaporization.
About the Author:
You can visit the website restorationspecialistmaufacturedhomes.com for more helpful information about The Procedure Involved In Mobile Home Releveling
You are receiving this because you signed up for it on 2011-10-03 from IP 203.109.66.181
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
No comments:
Post a Comment