Ways to Differentiate Among Various Computer Hard disks
A computer hard drive can be a storage unit that stores digitally encoded data this also device can be an essential part of all pcs. There are various kinds of drives which include ATA, SATA together with IDE hard disk drives and while the product look similar they provide different advantages. The following paragraphs will elaborate for a few ways to differentiate involving SATA together with IDE drives so that you can be sure that you are getting the proper computer hard drive for your computer.
The connection pins which were located behind the computer hdd can show you how to determine if your hard drive is IDE or SATA. Pc type of IDE drive, the drive should have 50 or more connector hooks. SATA drives on the other hand have almost no pins and some SATA drives shouldn't have any connection pins.
If you're still not sure about the species of computer hdd you have then the board connection will solve your confusion. IDE drives have connectors that consist of numerous pins spread over a space with 2 inches tall. The cable used to connect this IDE drive on the computer is actually wide and to be a ribbon. Sata harddrives have smallish connections similar to those seen on handphones.
The electrical power connector is another way through which you'll want to differentiate between the above drives. ATA hard drives have good sized connectors along with 4 extensive pins where SATA hard drives have more compact connectors exactly like the board relationship pins, although smaller.
The jumper is the last process through which you'll want to understand if you have IDE and SATA. IDE drives have jumper settings that allow the computer know which ribbon cable is slammed in but SATA hard disk shouldn't have any jumper adjustments.
The connection pins which were located behind the computer hdd can show you how to determine if your hard drive is IDE or SATA. Pc type of IDE drive, the drive should have 50 or more connector hooks. SATA drives on the other hand have almost no pins and some SATA drives shouldn't have any connection pins.
If you're still not sure about the species of computer hdd you have then the board connection will solve your confusion. IDE drives have connectors that consist of numerous pins spread over a space with 2 inches tall. The cable used to connect this IDE drive on the computer is actually wide and to be a ribbon. Sata harddrives have smallish connections similar to those seen on handphones.
The electrical power connector is another way through which you'll want to differentiate between the above drives. ATA hard drives have good sized connectors along with 4 extensive pins where SATA hard drives have more compact connectors exactly like the board relationship pins, although smaller.
The jumper is the last process through which you'll want to understand if you have IDE and SATA. IDE drives have jumper settings that allow the computer know which ribbon cable is slammed in but SATA hard disk shouldn't have any jumper adjustments.
About the Author:
If you are interested in sata 160gb , visit my website about scsi 147gb to find further information.
You are receiving this because you signed up for it on 2011-10-03 from IP 203.109.66.181
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
No comments:
Post a Comment