Basic High Accessibility - An Introduction To RAID
RAID is short for Redundant Assortment of Inexpensive Hard drives (other meanings may vary). In practice it is a couple of hard dvd drives configured for use using a single laptop computer system. This configuration fluctuates by supposed use, but the most common use with regard to RAID arrays is for high-availability installations. High-availability could be the measure with how protected to failure a pc or facilities is. The most common approach to help you high-availability in it is redundancy, and RAID arrays are an easy way to increase highly available services as a result of reducing the likelihood that a pc system might fail as a consequence of hard drive failure. The net result is that if a single hard disk drive (heretofore called a "hard drive" or "disk drive") that is part of a properly configured RAID vary were to fail, the final operations of that computer system would be unaffected.
RAID options are referred to by phone numbers, or grades. The minimum level RAID configuration is called RAID 0, and is known as "striping. " In this instance data is usually divided above two (or more) laptop external hard drive to boost performace. This can be a special condition, as it does not actually provide any redundancy. In truth, it may be said that RAID 0 actually raises the possibility meant for failure (thus cutting down availability) web site single group of data is being split over two disparate hard disks.
If one of those drives does not work out, the data in the remaining get is useless. Why even mention RAID 0? Because it is often used within extremely good performance applications, which include media updating. Also, as we will have later, RAID 0 can be used in combination with RAID 1 for the very powerful, but costly, high-availability construction.
The last popular RAID configuration is called RAID 0+1. For the reason that designation means, this is a mixture of RAID 0 and RAID 1. Basically, stripped hard drives are then mirrored meant for redundancy. This requires at a minimum four distinct hard drives, so the purchase price overhead is high, but that combines the high-availability benefits associated with mirroring and the high performance of striping in to a highly to choose from, high performance disk chaos. The limitation here is typically expense. Also, this involves hardware that will manage at a minimum for fiber channel hdd .
Under most circumstances RAID 5 works well. For larger installations, where performance is mostly a real problem, RAID 0+1 is absolutely not uncommon. For small company file servers, RAID 5 is mostly a perfect fit in. For most small web site servers, electricity servers (such since file database, DNS, DHCP, etc), RAID 5 is a lot more than sufficient. For small-to-medium-sized sources which get minimal potential customers, RAID 5 any time fine.
RAID options are referred to by phone numbers, or grades. The minimum level RAID configuration is called RAID 0, and is known as "striping. " In this instance data is usually divided above two (or more) laptop external hard drive to boost performace. This can be a special condition, as it does not actually provide any redundancy. In truth, it may be said that RAID 0 actually raises the possibility meant for failure (thus cutting down availability) web site single group of data is being split over two disparate hard disks.
If one of those drives does not work out, the data in the remaining get is useless. Why even mention RAID 0? Because it is often used within extremely good performance applications, which include media updating. Also, as we will have later, RAID 0 can be used in combination with RAID 1 for the very powerful, but costly, high-availability construction.
The last popular RAID configuration is called RAID 0+1. For the reason that designation means, this is a mixture of RAID 0 and RAID 1. Basically, stripped hard drives are then mirrored meant for redundancy. This requires at a minimum four distinct hard drives, so the purchase price overhead is high, but that combines the high-availability benefits associated with mirroring and the high performance of striping in to a highly to choose from, high performance disk chaos. The limitation here is typically expense. Also, this involves hardware that will manage at a minimum for fiber channel hdd .
Under most circumstances RAID 5 works well. For larger installations, where performance is mostly a real problem, RAID 0+1 is absolutely not uncommon. For small company file servers, RAID 5 is mostly a perfect fit in. For most small web site servers, electricity servers (such since file database, DNS, DHCP, etc), RAID 5 is a lot more than sufficient. For small-to-medium-sized sources which get minimal potential customers, RAID 5 any time fine.
About the Author:
For more information about hard drives external , visit my website about 68 pin scsi hard drive and update your computer .
You are receiving this because you signed up for it on 2011-10-03 from IP 203.109.66.181
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
No comments:
Post a Comment