Recovering Data From the Hard Drive
When you aren't able to repair an "unbootable" laptop hard drive, you can save the details it contains for a desktop computer using the "slave drive" treatment method. If the drive with the laptop haven't broken off mechanically, and that disk is "readable" - you'll be able to conserve the important data on your fibre channel sata .
Separate the battery in the laptop. Following, take released the get carefully, working on the holds that defend it. Pull the plug on the laptop computer. Remove most connections involving cable in the back. Additionally, remove edge cover with the chassis.
Get the cable that connects to the 15000rpm hdd . Scrutinize this connection. You will see another nasty connector in it. Connect some laptop to your IDE adaptor. Set adapter to your job as "Slave drive". Connect hard drive of laptop to your last stop of adapter. After relating the hard drive to the PC, put an additional cable in the available ports on motherboard.
Plug last end with SATA cable with the drive with laptop. Boot the laptop computer after connecting rear converter cables. Using that mouse, right click on 'Start' and then select Examine. Check for any laptop's drive with the listings. It appears like new drives. Copy any documents on the drive of laptop in the folder in the PC. Switch off desktop pc and take away all back cables all over again. Also, unplug the hard disk of laptop from additional case of hard drive and change side cover up on computer's desktop.
Now plug in all rear cables and sneaker it again. Remove that adapter in the drive of laptop, replace this old one which has a new a particular, and reinstall operating system on hard disk. Copy that saved file types from computer's desktop onto some sort of USB generate for switching them oh no- the brand-new or serviced laptop generate.
Separate the battery in the laptop. Following, take released the get carefully, working on the holds that defend it. Pull the plug on the laptop computer. Remove most connections involving cable in the back. Additionally, remove edge cover with the chassis.
Get the cable that connects to the 15000rpm hdd . Scrutinize this connection. You will see another nasty connector in it. Connect some laptop to your IDE adaptor. Set adapter to your job as "Slave drive". Connect hard drive of laptop to your last stop of adapter. After relating the hard drive to the PC, put an additional cable in the available ports on motherboard.
Plug last end with SATA cable with the drive with laptop. Boot the laptop computer after connecting rear converter cables. Using that mouse, right click on 'Start' and then select Examine. Check for any laptop's drive with the listings. It appears like new drives. Copy any documents on the drive of laptop in the folder in the PC. Switch off desktop pc and take away all back cables all over again. Also, unplug the hard disk of laptop from additional case of hard drive and change side cover up on computer's desktop.
Now plug in all rear cables and sneaker it again. Remove that adapter in the drive of laptop, replace this old one which has a new a particular, and reinstall operating system on hard disk. Copy that saved file types from computer's desktop onto some sort of USB generate for switching them oh no- the brand-new or serviced laptop generate.
About the Author:
If you are tired of finding a good scsi ultra320 80pin , check out the best services of 146gb ultra320 scsi
You are receiving this because you signed up for it on 2011-10-03 from IP 203.109.66.181
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
No comments:
Post a Comment