Varieties Of DMX Merge Machines
Parks, a variety of historical monuments, ultra modern retail outlets among other attractions characterize the amazing city of Philadelphia. Anyone who comes to the interesting city on Christmas will not fail to notice the spectacular light shows that take place at several points around the metro. These would be impossible without the aid of a DMX Merge controller, an amazing machine that makes all the interesting effects possible.
The minuscule piece of equipment is essential in concerts, discos and anywhere else where such spectacular shows are a critical part of the show. The lights used generally come in a specific color, and are then joined into channels, with each containing a single hue and having its own controller. During a concert, these are lit or switched off to attain different effects.
Using this machine, the signals from each of the controllers can be merged, making it a lot easier for operators to run a large number of lights from a single console. This, of course, is not the only advantage; these pieces of equipment also make it possible to track down the root of any problems that may arise, and to reduce the possibility of making mistakes. They can also be connected to personal computers, opening a whole new world of possibilities.
There are several types of mergers. The first is the do it yourself kind, leveraging the power of microprocessors that can be found in several electronics shops. The beauty of this is the low cost; a relatively robust system can be made for a relatively low cost. Unfortunately, one must have some advanced knowledge in electronics and soldering in order to pull this off. Another problem may be getting the right parts.
There is a mind boggling variety of store bought mergers. Those with limited needs can save their hard earned money and buy a low end machine. This will have a limited number of inputs, such as Universal Serial Bus ports, and may lack the ability to connect to a computer.
There may also be limitations in how many instructions it can accept. However, where money is a concern, these may be acceptable compromises. Cheap does not mean ineffective, however, and such machines will perform acceptably, as long as one keeps their expectations reasonable.
Mid level machines, on the other hand, seek to provide a satisfactory level of features and performance without costing too much. A typical merger in that category will normally have at least one microphone input, the ability to connect to a computer, one Universal Serial Bus port among other features. Such machines also more programmable than their lower priced brethren.
Manufacturers are even making machines with Thunderbolt ports, which makes them capable of connecting with computers made by Apple, or any that have a similar port. All these do come at a cost, however, and it is not a surprise to find machines in this category that cost thousands of dollars.
The minuscule piece of equipment is essential in concerts, discos and anywhere else where such spectacular shows are a critical part of the show. The lights used generally come in a specific color, and are then joined into channels, with each containing a single hue and having its own controller. During a concert, these are lit or switched off to attain different effects.
Using this machine, the signals from each of the controllers can be merged, making it a lot easier for operators to run a large number of lights from a single console. This, of course, is not the only advantage; these pieces of equipment also make it possible to track down the root of any problems that may arise, and to reduce the possibility of making mistakes. They can also be connected to personal computers, opening a whole new world of possibilities.
There are several types of mergers. The first is the do it yourself kind, leveraging the power of microprocessors that can be found in several electronics shops. The beauty of this is the low cost; a relatively robust system can be made for a relatively low cost. Unfortunately, one must have some advanced knowledge in electronics and soldering in order to pull this off. Another problem may be getting the right parts.
There is a mind boggling variety of store bought mergers. Those with limited needs can save their hard earned money and buy a low end machine. This will have a limited number of inputs, such as Universal Serial Bus ports, and may lack the ability to connect to a computer.
There may also be limitations in how many instructions it can accept. However, where money is a concern, these may be acceptable compromises. Cheap does not mean ineffective, however, and such machines will perform acceptably, as long as one keeps their expectations reasonable.
Mid level machines, on the other hand, seek to provide a satisfactory level of features and performance without costing too much. A typical merger in that category will normally have at least one microphone input, the ability to connect to a computer, one Universal Serial Bus port among other features. Such machines also more programmable than their lower priced brethren.
Manufacturers are even making machines with Thunderbolt ports, which makes them capable of connecting with computers made by Apple, or any that have a similar port. All these do come at a cost, however, and it is not a surprise to find machines in this category that cost thousands of dollars.
About the Author:
You can visit the website www.elmvideotechnology.com for more helpful information about Types Of DMX Merge Machines
You are receiving this because you signed up for it on 2011-10-03 from IP 203.109.66.181
To fine-tune your selection of which articles to receive, just login here
using your username:
To unsubscribe please use the following link:
Unsubscribe
No comments:
Post a Comment